Find the answer faster before you start a project.

TPK offers both standard catalogue products and project-based customization.

• Standard range — suitable for common facade, bridge, landscape and building exterior applications
• Structure & finish — custom dimensions, bracket adjustments and finish changes where feasible
• Optics & control — beam angle, dimming and control protocol adjustments depending on the product platform
• OEM support — branding, packaging and documentation for qualified OEM projects

If your project has non-standard mounting, optical or control requirements, contact TPK with drawings or a requirement brief and we can review feasibility.

TPK documents project experience across facade lighting, bridge lighting, hospitality, landmark, sports and urban renewal applications. Public project references include bridge and infrastructure projects, commercial facades, hotels, landmark buildings and stadium environments in international markets.

The best way to assess fit is by application type. If your project is a facade, bridge, hotel exterior, landscape or landmark lighting job, our team can recommend the most relevant product family and reference cases.

TPK provides both product supply and project support, but we are a manufacturer rather than a general contractor.

• Product recommendation and fixture selection
• Technical documents such as specification sheets, IES files, drawings and wiring references
• Customization review for optics, mounting and control requirements
• Installation guidance, remote technical support and project coordination where needed

For overseas projects, TPK mainly supports the project as a technical manufacturing partner rather than providing local construction labor.

TPK has established long-term partnerships with leading international LED chip and component brands. By combining high-quality light sources with TPK's in-house optical design capability, products are engineered to meet professional standards for colour consistency, light output stability and long-term reliability.

Quality assurance is governed by TPK's ISO 9001 quality management system, covering the full production process from material sourcing through SMD assembly, IP sealing, electrical testing, optical verification and 48-hour aging test before shipment.

For specific chip brand information relevant to your product enquiry, please contact our sales team.

TPK architectural lighting covers colour temperatures from 2700K (very warm white) to 6500K (cool/daylight white), with RGBW dynamic variants for colour-changing applications.

Standard CRI is Ra ≥80. The precision engineering series achieves Ra ≥90, suitable for applications where accurate colour rendering of stone, glass curtain walls and facade materials is critical — such as museum facades, premium hotels and heritage buildings.

MacAdam colour consistency is ≤3 SDCM standard, with ≤2 SDCM available on premium series — ensuring visual uniformity across multiple fixtures on the same facade.

Yes. TPK's RGBW wall washers and linear lights support DMX512 protocol, enabling dynamic colour changes, brightness adjustment and programmable scene sequences — suitable for commercial complexes, cultural tourism projects and urban landmark buildings.

Additional control protocols supported across different product models:

• RDM (Remote Device Management) — for bidirectional DMX communication and remote fixture addressing
• DALI-2 — for integration with building management systems
• 0-10V — simple analogue dimming for single-colour static installations
• Triac / Phase-cut — for retrofit dimming applications
• PWM — for low-voltage DC system integration

DMX512 long-distance signal amplifiers are available for bridge and large infrastructure installations where cable runs exceed standard transmission distances.

TPK LED architectural fixtures are designed for a rated life of 50,000 hours or more (L70 — the point at which lumen output drops to 70% of initial). At 8 operating hours per day, this equates to approximately 17 years of continuous use.

Warranty terms by product series:

• Standard LED wall washers and linear lights: 3 years
• Premium wall washer and stadium light series: 5 years
• Custom engineering products: subject to specification, confirmed at quotation stage

The warranty covers manufacturing defects, LED lumen depreciation beyond rated specifications, driver and electrical component failures under normal operating conditions, and IP rating failure under correct installation. See the full after-sales response process →

TPK LED architectural fixtures typically reduce energy consumption by 50–70% compared to traditional metal halide or fluorescent floodlights for equivalent light output.

Luminous efficacy reaches 130 lm/W and above for standard product lines — significantly higher than metal halide (80–100 lm/W) or fluorescent (60–80 lm/W) alternatives.

For large-scale projects — such as a commercial building facade with 200+ fixtures, or a bridge with several hundred wall washers — replacing traditional sources with TPK LED systems generates substantial annual electricity savings, alongside elimination of frequent lamp replacement costs and reduced maintenance access requirements at height.

For a project-specific energy saving calculation, please share your current fixture specifications and operating hours — our team can provide an estimate.

TPK's manufacturing facility is located in Dongfeng Town, Zhongshan City, Guangdong Province, China, with an operating area of about 8,000 square metres.

The factory supports outdoor architectural lighting production through organized assembly, optical and electrical testing, aging tests, waterproof verification and quality control processes under ISO 9001 management.

See more on Why TPK →

Yes. TPK provides IES photometric data files for all major product series. Files are compatible with DIALux, DIALux evo, AGi32 and Relux.

To use a TPK IES file in DIALux: (1) Download the .ies file from our Resources page. (2) In DIALux, go to File → Import Luminaire Data and select the file. (3) The fixture appears in your luminaire database — place it in your project and run the photometric calculation.

If a specific beam angle variant or custom product IES file is not listed in our Resources section, contact ES2@topkinglite.com and we will provide it directly.

Download IES files from our Resources page →

Static white (2700K / 3000K / 4000K) — "Restrained presence and premium quality":

• Best for: corporate headquarters, luxury hotels, financial centres, museums, high-end office buildings
• Effect: perfectly renders the natural texture of the building material (stone, glass curtain wall, metal cladding)
• Communicates: stability, permanence, high value — does not compete with the architecture for attention

Dynamic RGBW colour — "Commercial vitality and landmark impact":

• Best for: shopping centres, entertainment complexes, sports arenas, theme parks, mixed-use commercial developments
• Effect: strong visual impact and emotional engagement — turns the building into a city-scale visual focal point
• Advantage: can change colour schemes for festivals, sporting events, seasons or brand campaigns without hardware changes
• Reference project: Living World Mall, Indonesia — RGBW dynamic facade highlighting 3D geometric textures

Many commercial projects combine both approaches: static warm white for the base building skin, with RGBW accent fixtures on key architectural features for selective dynamic effects.

The IP (Ingress Protection) rating has two digits: the first indicates dust protection (6 = fully dust-tight), the second indicates water protection:

• IP65 — Protected against water jets from any direction. Suitable for sheltered outdoor locations or areas with occasional water exposure.
• IP67 — Can withstand immersion in water up to 1 metre depth for 30 minutes. Recommended minimum for all permanent outdoor architectural installations — facades, bridges, landscape, car wash lighting.
• IP68 — Rated for continuous submersion. Required for fountain lighting, underwater feature lighting or permanently submerged applications.

TPK recommendation: Always specify IP67 for permanent outdoor architectural installations. It provides a meaningful safety margin above IP65, ensuring long-term reliability in rain, high-pressure cleaning and accidental flooding scenarios.

• DMX512 — The professional standard for dynamic colour-changing architectural lighting. Best for RGBW programming, large facade installations with multiple zones, and lighting shows. One universe = up to 512 channels (128 RGBW fixtures or 170 RGB fixtures). Medium-high system complexity.
• DALI-2 — Best for dimming integration with building management systems (BMS). Suitable for mixed interior/exterior systems where central control is needed. Medium complexity.
• 0-10V — Simplest and most cost-effective for single-zone static white dimming. No programming required — dim with an analogue signal. Low complexity.
• Triac / Phase-cut — For retrofit dimming in residential or simple commercial applications. Low complexity.

Recommendation: For architectural facade lighting with dynamic colour or programmable scenes, choose DMX512. For static white with simple dimming, 0-10V is sufficient and more cost-effective. Discuss your specific control requirements with our engineering team before specifying.

For most standard and project-based orders, the production lead time is typically 3–5 weeks after order confirmation.

The exact schedule depends on customization scope, quantity, beam options, certification requirements and the current production plan. For urgent projects, contact our team first so we can check stock availability or suggest the fastest practical configuration.

Confirm the final schedule with our sales team when the quotation and order details are fixed.

For standard catalogue products, there is no fixed minimum order quantity for most items — we can accommodate both small project orders and large infrastructure quantities.

For custom and OEM products, MOQ depends on the type of modification:

• Colour modification (RAL matching): from 50–100 units
• Structural modification: from 100–200 units
• Full OEM / white-label production: typically 200+ units

Contact our sales team at ES2@topkinglite.com with your specific model and quantity requirement for a precise MOQ confirmation.

Yes. TPK provides full OEM manufacturing services for international distributors, lighting brands and regional suppliers.

OEM services include:

• Custom product labelling — laser engraving or label printing with your brand name, logo and model numbers
• Branded packaging — retail or project packaging in your brand identity
• Technical documentation — spec sheets, installation guides, certificates produced under your brand
• Certification support — assistance with ETL, CE or local market certification under your brand name
• Exclusivity options — products built exclusively for your brand, not sold to competitors

An NDA is available on request before detailed OEM discussions begin. See our full custom and OEM capability page →

Yes. TPK ships to customers across Asia, Europe, the Americas, the Middle East and Central Asia. We have delivered projects to 20+ countries including Russia, Philippines, Indonesia, USA, Colombia, Turkmenistan and across China.

Available delivery terms:

• FOB Zhongshan — client arranges freight from our factory port
• CIF (destination port) — TPK arranges freight and insurance to destination port
• DAP (destination) — TPK arranges delivery to your specified address

We work with established international freight partners. Contact our sales team for shipping cost estimates and transit time for your destination.

TPK supports international projects across North America, Europe, the Middle East, Southeast Asia and other overseas markets, depending on product certification and project requirements.

For market-specific projects, the most important check is not just destination country, but whether the required certification, voltage standard and control configuration are available for that product version.

Yes. TPK can arrange factory and showroom visits for customers, distributors and project partners by appointment.

Please email ES2@topkinglite.com with your proposed date, company name and topics you want to review, and our team will confirm availability.

TPK outdoor fixture housings are manufactured from high-strength die-cast aluminium alloy and tempered borosilicate glass — both materials with high recyclability rates at end of product life, causing no permanent environmental contamination.

For the internal electronic components (LED modules, DMX drivers, circuit boards), TPK recommends:

• Follow local WEEE (Waste Electrical and Electronic Equipment) Directive requirements and use a certified electronic waste recycling facility for disposal of electronic components
• In regions without WEEE infrastructure, engage a licensed e-waste processor for responsible disassembly

The most direct environmental contribution of TPK products is their extreme durability — validated through C5-M marine-grade corrosion resistance, IP67/IP68 weatherproofing and 50,000-hour design life. A fixture that lasts 17 years under daily use represents far less manufacturing resource consumption than two or three shorter-life replacements covering the same period.